CMOS Camera Module
• Colour, 160x120x24 bit transmitted image, fixed focus lens.
Processor
• 400MHz 16-bit DSP providing capture and compression capability up
to 15 fps allowing for future data rates (e.g. EDGE, 3G).
Flash
• 4MB Non-volatile storage of application software and configuration
settings.
RAM
• 16MB RAM for codespace and local image storage.
GPRS Module
• Class 10, quad-band (850/900/1800/1900 MHz).
• CE, FCC and IC approved
SIM
• 3V GPRS data-enabled SIM integrated into GPRS module.
Antenna
• Internal PCB type, quad-band (850/900/1800/1900 MHz).
PIR
• Fresnel lens integrated into sensor.
Status Indicators
• LEDs indicating power on/off, alarm on/off, connectivity, transmission.
External Power Supply
• Input: 100-240V AC 50-60Hz.
• Output: 7.5V DC @ 1.0A minimum.
• Will operate on any 7V-16VDC 1.0A input
Power Management
• The power management circuitry supports smart battery charging.
Ancillary Support Devices
• Power-on reset circuitry for smart recovery after power loss.
• On-board real-time clock for timestamping of images.
Enclosure
• Injection moulded plastic enclosure.
• External switch to soft switch power on/off. Allows the camera to
attach/detach from the GPRS network cleanly.
Battery
• 1000mAh Lithium-ion battery provides ~ 60 minutes of video
transmission capability in the event of power failure.
Wall Bracket / Table Stand
• Both wall bracket and table stand are supplied to meet all installation requirement.